Juniper Mist AP41 WiFi 5 802.11ac Wave 2 4x4 MU-MIMO Cloud Managed Access Point
Juniper Mist AP41 — WiFi 5 Cloud-Managed Access Point
Enterprise-grade dual-band WiFi 5 (802.11ac Wave 2) access point with 4x4:4 MU-MIMO, a dedicated third scanning radio and built-in Bluetooth LE. Managed entirely from the Juniper Mist AI cloud, and backed by a 12-month Reboot IT warranty.
Key Benefits
- WiFi 5 Wave 2 performance: Dual-band 4x4:4 MU-MIMO delivers up to 2.5 Gbps aggregate throughput for dense, high-demand environments.
- Dedicated scanning radio: A third radio continuously monitors the RF environment for security threats, interference and automatic optimisation — without stealing client airtime.
- Mist AI cloud management: Configure, monitor and troubleshoot from anywhere, with the Marvis virtual assistant surfacing issues before users notice them.
- Built-in Bluetooth LE: A 16-element BLE antenna array enables indoor location services, wayfinding and proximity engagement.
- Simple PoE deployment: Powered over a single 802.3at PoE+ cable with Gigabit Ethernet uplink — no separate power run required.
- Sustainable choice: Certified refurbished enterprise hardware at a fraction of new cost, keeping quality equipment out of landfill.
Performance in Use
The Mist AP41 is built for busy floors — open-plan offices, lecture theatres, retail spaces and conference rooms where dozens of devices compete for the same airtime. Its 4x4:4 MU-MIMO radios serve multiple clients simultaneously rather than one at a time, so throughput stays high even as the room fills up. The dual-band design balances legacy 2.4 GHz devices against fast 5 GHz clients automatically.
What sets the AP41 apart is its third radio. While the two client-serving radios handle traffic, the dedicated radio continuously scans the spectrum — spotting rogue access points, sources of interference and coverage gaps, and feeding that data back to Mist AI for automatic RF tuning. The result is a network that self-optimises instead of relying on manual site surveys.
Deployment is straightforward: mount to a ceiling or wall, run a single PoE+ cable, and adopt the AP into your Mist organisation from the cloud dashboard. From there the Marvis assistant proactively flags problems — a failing cable, a DHCP issue, a bad-behaving client — turning hours of troubleshooting into a quick answer.
Technical Specifications
| Brand | Juniper (Mist) |
| Model | AP41 |
| Type | Cloud-managed wireless access point (indoor) |
| WiFi Standard | WiFi 5 (802.11ac Wave 2) |
| Bands | Dual-band 2.4 GHz + 5 GHz |
| MU-MIMO | 4x4:4 on both radios |
| Max Throughput | Up to 2.5 Gbps aggregate (1.7 Gbps 5 GHz + 800 Mbps 2.4 GHz) |
| Third Radio | Dedicated dual-band scanning / security radio |
| Bluetooth | Bluetooth LE, 16-element antenna array (location services) |
| Management | Juniper Mist AI cloud (Marvis virtual assistant) |
| Uplink | Gigabit Ethernet (eth0), secondary eth1 port |
| Power | 802.3at PoE+ (or DC input) |
| Antennas | Internal |
| Mounting | Ceiling or wall |
| Warranty | 12-month Reboot IT warranty |
Is It Right For You?
Best For ✓
|
Not For ✗
|
Condition Grades
| Grade | Condition |
|---|---|
| A — Excellent | Minimal cosmetic marks. Fully tested and working, factory reset and ready to adopt. |
| B — Good | Light signs of prior use such as minor scuffs. Fully tested and working. |
Grading reflects cosmetic condition only — every unit is functionally tested and covered by our 12-month warranty.
Frequently Asked Questions
Do I need a subscription to use this access point?
Yes. The Mist AP41 is cloud-managed and requires an active Juniper Mist subscription to configure and operate. It is not a standalone or controller-based AP.
What WiFi standard does it support?
WiFi 5 — 802.11ac Wave 2 — with dual-band 4x4:4 MU-MIMO for up to 2.5 Gbps aggregate throughput.
How is it powered?
Over a single Ethernet cable using 802.3at PoE+, or via a DC power input. A PoE+ switch or injector is recommended.
Does it include a mounting bracket or PoE injector?
This listing is for the access point unit only. Mounting hardware and PoE injectors are not included unless otherwise stated — please contact us if you need these.
What does "certified refurbished" mean here?
Each unit is professionally tested, factory reset, cleaned and cosmetically graded by our Melbourne technicians, and backed by a 12-month warranty.
How much is shipping?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Warranty & Why Buy From Reboot IT
Every Juniper Mist AP41 comes with a 12-month Reboot IT warranty for complete peace of mind. Reboot IT has been refurbishing and supplying quality business IT and networking equipment from Melbourne since 2001, with rigorous testing, honest cosmetic grading and responsive local support. Buy with confidence from a trusted Australian refurbisher — visit reboot-it.com.au to learn more.
Original: $83.28
-65%$83.28
$29.15Juniper Mist AP41 WiFi 5 802.11ac Wave 2 4x4 MU-MIMO Cloud Managed Access Point
Juniper Mist AP41 — WiFi 5 Cloud-Managed Access Point
Enterprise-grade dual-band WiFi 5 (802.11ac Wave 2) access point with 4x4:4 MU-MIMO, a dedicated third scanning radio and built-in Bluetooth LE. Managed entirely from the Juniper Mist AI cloud, and backed by a 12-month Reboot IT warranty.
Key Benefits
- WiFi 5 Wave 2 performance: Dual-band 4x4:4 MU-MIMO delivers up to 2.5 Gbps aggregate throughput for dense, high-demand environments.
- Dedicated scanning radio: A third radio continuously monitors the RF environment for security threats, interference and automatic optimisation — without stealing client airtime.
- Mist AI cloud management: Configure, monitor and troubleshoot from anywhere, with the Marvis virtual assistant surfacing issues before users notice them.
- Built-in Bluetooth LE: A 16-element BLE antenna array enables indoor location services, wayfinding and proximity engagement.
- Simple PoE deployment: Powered over a single 802.3at PoE+ cable with Gigabit Ethernet uplink — no separate power run required.
- Sustainable choice: Certified refurbished enterprise hardware at a fraction of new cost, keeping quality equipment out of landfill.
Performance in Use
The Mist AP41 is built for busy floors — open-plan offices, lecture theatres, retail spaces and conference rooms where dozens of devices compete for the same airtime. Its 4x4:4 MU-MIMO radios serve multiple clients simultaneously rather than one at a time, so throughput stays high even as the room fills up. The dual-band design balances legacy 2.4 GHz devices against fast 5 GHz clients automatically.
What sets the AP41 apart is its third radio. While the two client-serving radios handle traffic, the dedicated radio continuously scans the spectrum — spotting rogue access points, sources of interference and coverage gaps, and feeding that data back to Mist AI for automatic RF tuning. The result is a network that self-optimises instead of relying on manual site surveys.
Deployment is straightforward: mount to a ceiling or wall, run a single PoE+ cable, and adopt the AP into your Mist organisation from the cloud dashboard. From there the Marvis assistant proactively flags problems — a failing cable, a DHCP issue, a bad-behaving client — turning hours of troubleshooting into a quick answer.
Technical Specifications
| Brand | Juniper (Mist) |
| Model | AP41 |
| Type | Cloud-managed wireless access point (indoor) |
| WiFi Standard | WiFi 5 (802.11ac Wave 2) |
| Bands | Dual-band 2.4 GHz + 5 GHz |
| MU-MIMO | 4x4:4 on both radios |
| Max Throughput | Up to 2.5 Gbps aggregate (1.7 Gbps 5 GHz + 800 Mbps 2.4 GHz) |
| Third Radio | Dedicated dual-band scanning / security radio |
| Bluetooth | Bluetooth LE, 16-element antenna array (location services) |
| Management | Juniper Mist AI cloud (Marvis virtual assistant) |
| Uplink | Gigabit Ethernet (eth0), secondary eth1 port |
| Power | 802.3at PoE+ (or DC input) |
| Antennas | Internal |
| Mounting | Ceiling or wall |
| Warranty | 12-month Reboot IT warranty |
Is It Right For You?
Best For ✓
|
Not For ✗
|
Condition Grades
| Grade | Condition |
|---|---|
| A — Excellent | Minimal cosmetic marks. Fully tested and working, factory reset and ready to adopt. |
| B — Good | Light signs of prior use such as minor scuffs. Fully tested and working. |
Grading reflects cosmetic condition only — every unit is functionally tested and covered by our 12-month warranty.
Frequently Asked Questions
Do I need a subscription to use this access point?
Yes. The Mist AP41 is cloud-managed and requires an active Juniper Mist subscription to configure and operate. It is not a standalone or controller-based AP.
What WiFi standard does it support?
WiFi 5 — 802.11ac Wave 2 — with dual-band 4x4:4 MU-MIMO for up to 2.5 Gbps aggregate throughput.
How is it powered?
Over a single Ethernet cable using 802.3at PoE+, or via a DC power input. A PoE+ switch or injector is recommended.
Does it include a mounting bracket or PoE injector?
This listing is for the access point unit only. Mounting hardware and PoE injectors are not included unless otherwise stated — please contact us if you need these.
What does "certified refurbished" mean here?
Each unit is professionally tested, factory reset, cleaned and cosmetically graded by our Melbourne technicians, and backed by a 12-month warranty.
How much is shipping?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Warranty & Why Buy From Reboot IT
Every Juniper Mist AP41 comes with a 12-month Reboot IT warranty for complete peace of mind. Reboot IT has been refurbishing and supplying quality business IT and networking equipment from Melbourne since 2001, with rigorous testing, honest cosmetic grading and responsive local support. Buy with confidence from a trusted Australian refurbisher — visit reboot-it.com.au to learn more.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Juniper Mist AP41 — WiFi 5 Cloud-Managed Access Point
Enterprise-grade dual-band WiFi 5 (802.11ac Wave 2) access point with 4x4:4 MU-MIMO, a dedicated third scanning radio and built-in Bluetooth LE. Managed entirely from the Juniper Mist AI cloud, and backed by a 12-month Reboot IT warranty.
Key Benefits
- WiFi 5 Wave 2 performance: Dual-band 4x4:4 MU-MIMO delivers up to 2.5 Gbps aggregate throughput for dense, high-demand environments.
- Dedicated scanning radio: A third radio continuously monitors the RF environment for security threats, interference and automatic optimisation — without stealing client airtime.
- Mist AI cloud management: Configure, monitor and troubleshoot from anywhere, with the Marvis virtual assistant surfacing issues before users notice them.
- Built-in Bluetooth LE: A 16-element BLE antenna array enables indoor location services, wayfinding and proximity engagement.
- Simple PoE deployment: Powered over a single 802.3at PoE+ cable with Gigabit Ethernet uplink — no separate power run required.
- Sustainable choice: Certified refurbished enterprise hardware at a fraction of new cost, keeping quality equipment out of landfill.
Performance in Use
The Mist AP41 is built for busy floors — open-plan offices, lecture theatres, retail spaces and conference rooms where dozens of devices compete for the same airtime. Its 4x4:4 MU-MIMO radios serve multiple clients simultaneously rather than one at a time, so throughput stays high even as the room fills up. The dual-band design balances legacy 2.4 GHz devices against fast 5 GHz clients automatically.
What sets the AP41 apart is its third radio. While the two client-serving radios handle traffic, the dedicated radio continuously scans the spectrum — spotting rogue access points, sources of interference and coverage gaps, and feeding that data back to Mist AI for automatic RF tuning. The result is a network that self-optimises instead of relying on manual site surveys.
Deployment is straightforward: mount to a ceiling or wall, run a single PoE+ cable, and adopt the AP into your Mist organisation from the cloud dashboard. From there the Marvis assistant proactively flags problems — a failing cable, a DHCP issue, a bad-behaving client — turning hours of troubleshooting into a quick answer.
Technical Specifications
| Brand | Juniper (Mist) |
| Model | AP41 |
| Type | Cloud-managed wireless access point (indoor) |
| WiFi Standard | WiFi 5 (802.11ac Wave 2) |
| Bands | Dual-band 2.4 GHz + 5 GHz |
| MU-MIMO | 4x4:4 on both radios |
| Max Throughput | Up to 2.5 Gbps aggregate (1.7 Gbps 5 GHz + 800 Mbps 2.4 GHz) |
| Third Radio | Dedicated dual-band scanning / security radio |
| Bluetooth | Bluetooth LE, 16-element antenna array (location services) |
| Management | Juniper Mist AI cloud (Marvis virtual assistant) |
| Uplink | Gigabit Ethernet (eth0), secondary eth1 port |
| Power | 802.3at PoE+ (or DC input) |
| Antennas | Internal |
| Mounting | Ceiling or wall |
| Warranty | 12-month Reboot IT warranty |
Is It Right For You?
Best For ✓
|
Not For ✗
|
Condition Grades
| Grade | Condition |
|---|---|
| A — Excellent | Minimal cosmetic marks. Fully tested and working, factory reset and ready to adopt. |
| B — Good | Light signs of prior use such as minor scuffs. Fully tested and working. |
Grading reflects cosmetic condition only — every unit is functionally tested and covered by our 12-month warranty.
Frequently Asked Questions
Do I need a subscription to use this access point?
Yes. The Mist AP41 is cloud-managed and requires an active Juniper Mist subscription to configure and operate. It is not a standalone or controller-based AP.
What WiFi standard does it support?
WiFi 5 — 802.11ac Wave 2 — with dual-band 4x4:4 MU-MIMO for up to 2.5 Gbps aggregate throughput.
How is it powered?
Over a single Ethernet cable using 802.3at PoE+, or via a DC power input. A PoE+ switch or injector is recommended.
Does it include a mounting bracket or PoE injector?
This listing is for the access point unit only. Mounting hardware and PoE injectors are not included unless otherwise stated — please contact us if you need these.
What does "certified refurbished" mean here?
Each unit is professionally tested, factory reset, cleaned and cosmetically graded by our Melbourne technicians, and backed by a 12-month warranty.
How much is shipping?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Warranty & Why Buy From Reboot IT
Every Juniper Mist AP41 comes with a 12-month Reboot IT warranty for complete peace of mind. Reboot IT has been refurbishing and supplying quality business IT and networking equipment from Melbourne since 2001, with rigorous testing, honest cosmetic grading and responsive local support. Buy with confidence from a trusted Australian refurbisher — visit reboot-it.com.au to learn more.
