HP Aruba 2540 24G PoE+ 4SFP+ JL356A Managed Switch Rack Mount Enterprise | Wty
HP Aruba 2540 24G PoE+ 4SFP+ JL356A — Smart-Managed Access Switch
A smart-managed access switch with 24 x Gigabit PoE+ ports, 370W PoE budget, and 4 x SFP+ 10G-capable uplinks. Ideal for SMB and small enterprise access layer deployments requiring PoE and high-speed uplinks. Backed by a 12-month Reboot IT warranty.
Key Benefits
- 24 x PoE+ Gigabit ports, 370W budget: Power wireless access points, IP phones, and cameras across a complete SMB access layer from a single 1U switch.
- 4 x SFP+ uplinks (1G/10G-capable): 10G uplink capacity prevents bottlenecks when all 24 access ports are active — ideal for converged data, voice, and video networks.
- VLAN, QoS, and access control: 802.1Q VLANs for traffic segmentation, QoS prioritisation for voice and video, and 802.1X port authentication for network access control.
- Static routing built in: Route between VLANs without a dedicated router — simplifies small enterprise topology and reduces hardware costs.
- Simple web and CLI management: Intuitive web interface and full CLI access make it easy to configure and monitor without specialist training.
- Certified refurbished with 12-month warranty: Professionally tested and graded by Reboot IT — Melbourne's refurbished networking specialists since 2001.
Performance in Use
The HP Aruba 2540 24G PoE+ 4SFP+ (JL356A) is a smart-managed access switch designed for SMB and small enterprise environments where PoE, VLANs, and 10G uplinks are required without the complexity of a full enterprise platform. With 24 PoE+ Gigabit ports and 370W of shared power, it comfortably handles a mixed deployment of Aruba or Cisco wireless APs (15–25W), IP desk phones (4–6W), and IP cameras — all from a single 1U rack unit.
The four SFP+ ports are a standout feature at this price point. Running 10G DAC cables or SFP+ fibre modules to an aggregation or core switch eliminates the single-Gigabit uplink bottleneck that affects lower-tier switches when all 24 access ports are active. LACP allows two of these uplinks to be bonded for active-active redundancy — critical for environments where the switch is a single point of failure for multiple VoIP phones or security cameras.
The 2540's static routing capability allows inter-VLAN routing locally on the switch, avoiding the need for a separate router in smaller deployments. Combined with DHCP snooping, Dynamic ARP Inspection, and 802.1X, it provides a comprehensive security posture appropriate for a small enterprise. Management via web GUI, CLI, or SNMP makes it accessible to both IT generalists and network specialists.
Tech Specs
| Model | HP Aruba 2540 24G PoE+ 4SFP+ Switch (JL356A) |
| PoE+ Ports | 24 x 10/100/1000BASE-T PoE+ (IEEE 802.3at) |
| Uplink Ports | 4 x SFP+ (1G/10G-capable) |
| Total PoE Budget | 370W |
| Routing | Layer 3 static routing, inter-VLAN routing |
| Security | 802.1X, DHCP snooping, DAI, ACLs |
| QoS | 8 queues per port, 802.1p priority, DSCP |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, SSH, Telnet |
| Additional Ports | 1 x USB, 1 x RJ-45 console |
| Form Factor | 1U rack-mountable |
| Standards | IEEE 802.3at PoE+, 802.1X, 802.3ad LACP, 802.1Q VLANs |
| Warranty | 12 months (Reboot IT) |
Is It Right for You?
|
✓ Best For • SMB and small enterprise access layer • Deployments with 24 or fewer PoE devices • Converged voice, data, and Wi-Fi networks • Sites needing 10G uplinks on a budget • Inter-VLAN routing without a dedicated router |
✗ Not For • Large enterprise requiring 48+ PoE ports • Environments needing OSPF/RIP dynamic routing • Aruba Central ZTP managed deployments • Very high PoE density (>370W total budget) • Unmanaged plug-and-play switch needs |
Condition Grades
| Grade | Cosmetic Condition | Functionality |
|---|---|---|
| A — Excellent | Minimal marks, clean chassis and port panel | All ports and PoE fully tested and verified |
| B — Good | Light wear, minor surface scratches | All ports and PoE fully tested and verified |
Frequently Asked Questions
How does the 2540 differ from the 2930F and 2930M?
The 2540 is a smart-managed switch with static routing only, while the 2930F and 2930M are full Layer 3 switches supporting OSPF and RIP dynamic routing. The 2540 is simpler and more cost-effective for SMB access layers where dynamic routing is not required.
Are the SFP+ ports 10G capable?
Yes — all four SFP+ uplink ports support both 1G SFP and 10G SFP+ modules. Using 10G modules eliminates uplink bottlenecks when all 24 access ports are heavily loaded.
Can all 24 ports deliver PoE+ simultaneously?
The 370W shared budget supports simultaneous PoE on all 24 ports in typical mixed deployments. Powering high-draw devices such as PTZ cameras (25W each) across all ports simultaneously would approach the 370W limit and should be planned accordingly.
Does the 2540 support VLAN routing?
Yes — the JL356A supports inter-VLAN static routing, allowing traffic to flow between VLANs directly on the switch. Dynamic routing protocols (OSPF, RIP) are not supported.
Does it support link aggregation (LACP)?
Yes — the 2540 supports IEEE 802.3ad LACP, allowing multiple SFP+ ports to be bonded for increased uplink bandwidth or active-active redundancy.
What shipping costs apply?
Shipping costs apply based on size and destination — rates are calculated at checkout.
12-Month Warranty — Every HP Aruba 2540 24G PoE+ 4SFP+ JL356A sold by Reboot IT includes a 12-month warranty covering hardware defects and port failures. All 24 PoE+ ports and 4 SFP+ uplinks are tested and verified before dispatch.
Reboot IT has been Australia's trusted refurbished enterprise networking specialist since 2001. Visit reboot-it.com.au or contact our Melbourne team for warranty claims and technical support.
Original: $125.27
-65%$125.27
$43.84More Images
HP Aruba 2540 24G PoE+ 4SFP+ JL356A Managed Switch Rack Mount Enterprise | Wty
HP Aruba 2540 24G PoE+ 4SFP+ JL356A — Smart-Managed Access Switch
A smart-managed access switch with 24 x Gigabit PoE+ ports, 370W PoE budget, and 4 x SFP+ 10G-capable uplinks. Ideal for SMB and small enterprise access layer deployments requiring PoE and high-speed uplinks. Backed by a 12-month Reboot IT warranty.
Key Benefits
- 24 x PoE+ Gigabit ports, 370W budget: Power wireless access points, IP phones, and cameras across a complete SMB access layer from a single 1U switch.
- 4 x SFP+ uplinks (1G/10G-capable): 10G uplink capacity prevents bottlenecks when all 24 access ports are active — ideal for converged data, voice, and video networks.
- VLAN, QoS, and access control: 802.1Q VLANs for traffic segmentation, QoS prioritisation for voice and video, and 802.1X port authentication for network access control.
- Static routing built in: Route between VLANs without a dedicated router — simplifies small enterprise topology and reduces hardware costs.
- Simple web and CLI management: Intuitive web interface and full CLI access make it easy to configure and monitor without specialist training.
- Certified refurbished with 12-month warranty: Professionally tested and graded by Reboot IT — Melbourne's refurbished networking specialists since 2001.
Performance in Use
The HP Aruba 2540 24G PoE+ 4SFP+ (JL356A) is a smart-managed access switch designed for SMB and small enterprise environments where PoE, VLANs, and 10G uplinks are required without the complexity of a full enterprise platform. With 24 PoE+ Gigabit ports and 370W of shared power, it comfortably handles a mixed deployment of Aruba or Cisco wireless APs (15–25W), IP desk phones (4–6W), and IP cameras — all from a single 1U rack unit.
The four SFP+ ports are a standout feature at this price point. Running 10G DAC cables or SFP+ fibre modules to an aggregation or core switch eliminates the single-Gigabit uplink bottleneck that affects lower-tier switches when all 24 access ports are active. LACP allows two of these uplinks to be bonded for active-active redundancy — critical for environments where the switch is a single point of failure for multiple VoIP phones or security cameras.
The 2540's static routing capability allows inter-VLAN routing locally on the switch, avoiding the need for a separate router in smaller deployments. Combined with DHCP snooping, Dynamic ARP Inspection, and 802.1X, it provides a comprehensive security posture appropriate for a small enterprise. Management via web GUI, CLI, or SNMP makes it accessible to both IT generalists and network specialists.
Tech Specs
| Model | HP Aruba 2540 24G PoE+ 4SFP+ Switch (JL356A) |
| PoE+ Ports | 24 x 10/100/1000BASE-T PoE+ (IEEE 802.3at) |
| Uplink Ports | 4 x SFP+ (1G/10G-capable) |
| Total PoE Budget | 370W |
| Routing | Layer 3 static routing, inter-VLAN routing |
| Security | 802.1X, DHCP snooping, DAI, ACLs |
| QoS | 8 queues per port, 802.1p priority, DSCP |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, SSH, Telnet |
| Additional Ports | 1 x USB, 1 x RJ-45 console |
| Form Factor | 1U rack-mountable |
| Standards | IEEE 802.3at PoE+, 802.1X, 802.3ad LACP, 802.1Q VLANs |
| Warranty | 12 months (Reboot IT) |
Is It Right for You?
|
✓ Best For • SMB and small enterprise access layer • Deployments with 24 or fewer PoE devices • Converged voice, data, and Wi-Fi networks • Sites needing 10G uplinks on a budget • Inter-VLAN routing without a dedicated router |
✗ Not For • Large enterprise requiring 48+ PoE ports • Environments needing OSPF/RIP dynamic routing • Aruba Central ZTP managed deployments • Very high PoE density (>370W total budget) • Unmanaged plug-and-play switch needs |
Condition Grades
| Grade | Cosmetic Condition | Functionality |
|---|---|---|
| A — Excellent | Minimal marks, clean chassis and port panel | All ports and PoE fully tested and verified |
| B — Good | Light wear, minor surface scratches | All ports and PoE fully tested and verified |
Frequently Asked Questions
How does the 2540 differ from the 2930F and 2930M?
The 2540 is a smart-managed switch with static routing only, while the 2930F and 2930M are full Layer 3 switches supporting OSPF and RIP dynamic routing. The 2540 is simpler and more cost-effective for SMB access layers where dynamic routing is not required.
Are the SFP+ ports 10G capable?
Yes — all four SFP+ uplink ports support both 1G SFP and 10G SFP+ modules. Using 10G modules eliminates uplink bottlenecks when all 24 access ports are heavily loaded.
Can all 24 ports deliver PoE+ simultaneously?
The 370W shared budget supports simultaneous PoE on all 24 ports in typical mixed deployments. Powering high-draw devices such as PTZ cameras (25W each) across all ports simultaneously would approach the 370W limit and should be planned accordingly.
Does the 2540 support VLAN routing?
Yes — the JL356A supports inter-VLAN static routing, allowing traffic to flow between VLANs directly on the switch. Dynamic routing protocols (OSPF, RIP) are not supported.
Does it support link aggregation (LACP)?
Yes — the 2540 supports IEEE 802.3ad LACP, allowing multiple SFP+ ports to be bonded for increased uplink bandwidth or active-active redundancy.
What shipping costs apply?
Shipping costs apply based on size and destination — rates are calculated at checkout.
12-Month Warranty — Every HP Aruba 2540 24G PoE+ 4SFP+ JL356A sold by Reboot IT includes a 12-month warranty covering hardware defects and port failures. All 24 PoE+ ports and 4 SFP+ uplinks are tested and verified before dispatch.
Reboot IT has been Australia's trusted refurbished enterprise networking specialist since 2001. Visit reboot-it.com.au or contact our Melbourne team for warranty claims and technical support.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
HP Aruba 2540 24G PoE+ 4SFP+ JL356A — Smart-Managed Access Switch
A smart-managed access switch with 24 x Gigabit PoE+ ports, 370W PoE budget, and 4 x SFP+ 10G-capable uplinks. Ideal for SMB and small enterprise access layer deployments requiring PoE and high-speed uplinks. Backed by a 12-month Reboot IT warranty.
Key Benefits
- 24 x PoE+ Gigabit ports, 370W budget: Power wireless access points, IP phones, and cameras across a complete SMB access layer from a single 1U switch.
- 4 x SFP+ uplinks (1G/10G-capable): 10G uplink capacity prevents bottlenecks when all 24 access ports are active — ideal for converged data, voice, and video networks.
- VLAN, QoS, and access control: 802.1Q VLANs for traffic segmentation, QoS prioritisation for voice and video, and 802.1X port authentication for network access control.
- Static routing built in: Route between VLANs without a dedicated router — simplifies small enterprise topology and reduces hardware costs.
- Simple web and CLI management: Intuitive web interface and full CLI access make it easy to configure and monitor without specialist training.
- Certified refurbished with 12-month warranty: Professionally tested and graded by Reboot IT — Melbourne's refurbished networking specialists since 2001.
Performance in Use
The HP Aruba 2540 24G PoE+ 4SFP+ (JL356A) is a smart-managed access switch designed for SMB and small enterprise environments where PoE, VLANs, and 10G uplinks are required without the complexity of a full enterprise platform. With 24 PoE+ Gigabit ports and 370W of shared power, it comfortably handles a mixed deployment of Aruba or Cisco wireless APs (15–25W), IP desk phones (4–6W), and IP cameras — all from a single 1U rack unit.
The four SFP+ ports are a standout feature at this price point. Running 10G DAC cables or SFP+ fibre modules to an aggregation or core switch eliminates the single-Gigabit uplink bottleneck that affects lower-tier switches when all 24 access ports are active. LACP allows two of these uplinks to be bonded for active-active redundancy — critical for environments where the switch is a single point of failure for multiple VoIP phones or security cameras.
The 2540's static routing capability allows inter-VLAN routing locally on the switch, avoiding the need for a separate router in smaller deployments. Combined with DHCP snooping, Dynamic ARP Inspection, and 802.1X, it provides a comprehensive security posture appropriate for a small enterprise. Management via web GUI, CLI, or SNMP makes it accessible to both IT generalists and network specialists.
Tech Specs
| Model | HP Aruba 2540 24G PoE+ 4SFP+ Switch (JL356A) |
| PoE+ Ports | 24 x 10/100/1000BASE-T PoE+ (IEEE 802.3at) |
| Uplink Ports | 4 x SFP+ (1G/10G-capable) |
| Total PoE Budget | 370W |
| Routing | Layer 3 static routing, inter-VLAN routing |
| Security | 802.1X, DHCP snooping, DAI, ACLs |
| QoS | 8 queues per port, 802.1p priority, DSCP |
| Management | Web GUI, CLI, SNMP v1/v2c/v3, SSH, Telnet |
| Additional Ports | 1 x USB, 1 x RJ-45 console |
| Form Factor | 1U rack-mountable |
| Standards | IEEE 802.3at PoE+, 802.1X, 802.3ad LACP, 802.1Q VLANs |
| Warranty | 12 months (Reboot IT) |
Is It Right for You?
|
✓ Best For • SMB and small enterprise access layer • Deployments with 24 or fewer PoE devices • Converged voice, data, and Wi-Fi networks • Sites needing 10G uplinks on a budget • Inter-VLAN routing without a dedicated router |
✗ Not For • Large enterprise requiring 48+ PoE ports • Environments needing OSPF/RIP dynamic routing • Aruba Central ZTP managed deployments • Very high PoE density (>370W total budget) • Unmanaged plug-and-play switch needs |
Condition Grades
| Grade | Cosmetic Condition | Functionality |
|---|---|---|
| A — Excellent | Minimal marks, clean chassis and port panel | All ports and PoE fully tested and verified |
| B — Good | Light wear, minor surface scratches | All ports and PoE fully tested and verified |
Frequently Asked Questions
How does the 2540 differ from the 2930F and 2930M?
The 2540 is a smart-managed switch with static routing only, while the 2930F and 2930M are full Layer 3 switches supporting OSPF and RIP dynamic routing. The 2540 is simpler and more cost-effective for SMB access layers where dynamic routing is not required.
Are the SFP+ ports 10G capable?
Yes — all four SFP+ uplink ports support both 1G SFP and 10G SFP+ modules. Using 10G modules eliminates uplink bottlenecks when all 24 access ports are heavily loaded.
Can all 24 ports deliver PoE+ simultaneously?
The 370W shared budget supports simultaneous PoE on all 24 ports in typical mixed deployments. Powering high-draw devices such as PTZ cameras (25W each) across all ports simultaneously would approach the 370W limit and should be planned accordingly.
Does the 2540 support VLAN routing?
Yes — the JL356A supports inter-VLAN static routing, allowing traffic to flow between VLANs directly on the switch. Dynamic routing protocols (OSPF, RIP) are not supported.
Does it support link aggregation (LACP)?
Yes — the 2540 supports IEEE 802.3ad LACP, allowing multiple SFP+ ports to be bonded for increased uplink bandwidth or active-active redundancy.
What shipping costs apply?
Shipping costs apply based on size and destination — rates are calculated at checkout.
12-Month Warranty — Every HP Aruba 2540 24G PoE+ 4SFP+ JL356A sold by Reboot IT includes a 12-month warranty covering hardware defects and port failures. All 24 PoE+ ports and 4 SFP+ uplinks are tested and verified before dispatch.
Reboot IT has been Australia's trusted refurbished enterprise networking specialist since 2001. Visit reboot-it.com.au or contact our Melbourne team for warranty claims and technical support.
