HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty
HomeStore

HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty

HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty

HP Aruba 2530-48G (J9775A) 48-Port Gigabit Managed Switch — Layer 2 Access with SFP Uplinks

The HP Aruba 2530-48G (J9775A) delivers 48 Gigabit ports plus four SFP uplinks in a compact 1U chassis, with full Layer 2 management. Backed by a 12-month Reboot IT warranty, it's a dependable, energy-efficient access switch for enterprise edge and branch-office networks. This is the non-PoE model.

  • 48 × Gigabit Ports: Full 10/100/1000BASE-T on every port for fast wired connectivity to PCs, servers, printers, and access points.
  • 4 × SFP Gigabit Uplinks: Fibre or copper uplinks to core switches and routers for flexible, high-speed backbone connections.
  • Full Layer 2 Management: 802.1Q VLANs, 802.1X / MAC / Web authentication, ACLs, and QoS with priority queues for granular traffic control.
  • Advanced Security: DHCP snooping, Dynamic ARP Protection, and Dynamic IP Lockdown defend against common Layer 2 attacks.
  • Flexible Management: Web GUI, CLI (console or micro-USB), and SNMP v1/v2c/v3, plus HP IMC integration for enterprise-wide visibility.
  • Energy-Efficient Design: IEEE 802.3az EEE, port scheduling, and LED disable reduce power draw without sacrificing performance.

Performance in Use

In a busy office or campus, the 2530-48G excels as an access-layer switch. All 48 Gigabit ports run at full speed, so file transfers, backups, and everyday traffic move quickly across the LAN, while the four SFP uplinks provide clean aggregation paths back to the core — keeping the access layer from becoming a bottleneck. As a non-PoE model, it's an economical choice where powered devices aren't required or where PoE is supplied separately.

The Layer 2 feature set covers the essentials for mid-size deployments: segment traffic with 802.1Q VLANs, enforce per-port security with 802.1X authentication, and prioritise real-time traffic such as VoIP using IEEE 802.1p QoS. DHCP snooping and Dynamic ARP Protection keep the network resilient against common Layer 2 threats, while built-in sFlow and RMON deliver the visibility teams need without extra licensing.

Management flexibility is a standout. Whether your team prefers a Web GUI for day-to-day moves and adds, a CLI for scripted configuration, or SNMP for integration with a network management system, the 2530-48G covers all three. HP Intelligent Management Center (IMC) extends this further with end-to-end topology views, compliance reporting, and policy management across the whole stack.

Technical Specifications

Specification Detail
Model HP Aruba 2530-48G (J9775A)
Ports 48 × 10/100/1000BASE-T RJ-45
Uplink Ports 4 × SFP Gigabit (mini-GBIC)
PoE Non-PoE model
Switching Capacity 104 Gbps
Layer Layer 2 managed
VLANs 802.1Q, up to 512 VLANs
QoS IEEE 802.1p, priority queues, WDRR/SP scheduling
Security 802.1X, MAC auth, Web auth, DHCP snooping, DAI, IP lockdown, ACLs
Management Web GUI, CLI (console/USB), SNMP v1/v2c/v3, HP IMC
Monitoring sFlow, RMON, port mirroring
Form Factor 1U rack-mountable
IPv6 Support IPv6 host support
Warranty 12 months (Reboot IT)

Is It Right for You?

✓ Best For ✗ Not For
High-density Gigabit access at the network edge Powering PoE devices (this is a non-PoE model)
Branch offices needing secure, managed access Networks requiring Layer 3 routing
Sites wanting VLANs, QoS, and fibre uplinks High-density 10GbE access requirements
SMB and enterprise edge deployments Buyers needing an active HP support contract

Condition Grades

Grade Cosmetic Condition Functionality
A — Excellent Minimal marks, clean ports and chassis Fully tested, all ports operational
B — Good Light wear, minor scratches Fully tested, all ports operational

Frequently Asked Questions

Does this switch provide PoE?

No — the J9775A is the non-PoE model. If you need to power VoIP phones, cameras, or access points over the network cable, choose a 2530 PoE+ model (e.g. J9772A) instead.

What SFP modules are compatible with the uplinks?

The four SFP uplink ports accept standard Gigabit SFP modules (mini-GBIC), including HP-branded and many third-party 1000BASE-SX, 1000BASE-LX, and 1000BASE-T transceivers. HP-compatible modules are recommended for guaranteed compatibility.

Is this a managed switch?

Yes. The 2530-48G is a fully managed Layer 2 switch supporting VLANs, QoS, ACLs, and 802.1X, configurable via Web GUI, CLI, or SNMP.

Can I manage the switch remotely?

Yes. It supports Web GUI, CLI (console port or micro-USB), and SNMP v1/v2c/v3, and integrates with HP Intelligent Management Center (IMC) for centralised multi-switch management.

What condition will I receive the switch in?

The switch has been professionally cleaned, tested, and graded by Reboot IT technicians in Melbourne. Grade A (Excellent) shows minimal marks; Grade B (Good) shows light wear. All ports are verified operational before dispatch.

What are the shipping options?

Shipping costs apply based on size and destination — rates are calculated at checkout. This switch is a bulky item, so freight rates apply.

12-Month Warranty & Reboot IT Trust

Every HP Aruba 2530-48G (J9775A) switch sold by Reboot IT includes a 12-month warranty covering hardware defects and port failures. If anything goes wrong, our Melbourne-based team handles repairs or replacements quickly — no runaround. We've been refurbishing IT equipment since 2001 and stand behind every unit we sell at reboot-it.com.au.

$15.92

Original: $45.49

-65%
HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty

$45.49

$15.92

More Images

HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty - Image 2
HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty - Image 3

HP Aruba 2530-48G J9775A 48-Port Gigabit Managed Switch 4x SFP Layer 2 Wty

HP Aruba 2530-48G (J9775A) 48-Port Gigabit Managed Switch — Layer 2 Access with SFP Uplinks

The HP Aruba 2530-48G (J9775A) delivers 48 Gigabit ports plus four SFP uplinks in a compact 1U chassis, with full Layer 2 management. Backed by a 12-month Reboot IT warranty, it's a dependable, energy-efficient access switch for enterprise edge and branch-office networks. This is the non-PoE model.

  • 48 × Gigabit Ports: Full 10/100/1000BASE-T on every port for fast wired connectivity to PCs, servers, printers, and access points.
  • 4 × SFP Gigabit Uplinks: Fibre or copper uplinks to core switches and routers for flexible, high-speed backbone connections.
  • Full Layer 2 Management: 802.1Q VLANs, 802.1X / MAC / Web authentication, ACLs, and QoS with priority queues for granular traffic control.
  • Advanced Security: DHCP snooping, Dynamic ARP Protection, and Dynamic IP Lockdown defend against common Layer 2 attacks.
  • Flexible Management: Web GUI, CLI (console or micro-USB), and SNMP v1/v2c/v3, plus HP IMC integration for enterprise-wide visibility.
  • Energy-Efficient Design: IEEE 802.3az EEE, port scheduling, and LED disable reduce power draw without sacrificing performance.

Performance in Use

In a busy office or campus, the 2530-48G excels as an access-layer switch. All 48 Gigabit ports run at full speed, so file transfers, backups, and everyday traffic move quickly across the LAN, while the four SFP uplinks provide clean aggregation paths back to the core — keeping the access layer from becoming a bottleneck. As a non-PoE model, it's an economical choice where powered devices aren't required or where PoE is supplied separately.

The Layer 2 feature set covers the essentials for mid-size deployments: segment traffic with 802.1Q VLANs, enforce per-port security with 802.1X authentication, and prioritise real-time traffic such as VoIP using IEEE 802.1p QoS. DHCP snooping and Dynamic ARP Protection keep the network resilient against common Layer 2 threats, while built-in sFlow and RMON deliver the visibility teams need without extra licensing.

Management flexibility is a standout. Whether your team prefers a Web GUI for day-to-day moves and adds, a CLI for scripted configuration, or SNMP for integration with a network management system, the 2530-48G covers all three. HP Intelligent Management Center (IMC) extends this further with end-to-end topology views, compliance reporting, and policy management across the whole stack.

Technical Specifications

Specification Detail
Model HP Aruba 2530-48G (J9775A)
Ports 48 × 10/100/1000BASE-T RJ-45
Uplink Ports 4 × SFP Gigabit (mini-GBIC)
PoE Non-PoE model
Switching Capacity 104 Gbps
Layer Layer 2 managed
VLANs 802.1Q, up to 512 VLANs
QoS IEEE 802.1p, priority queues, WDRR/SP scheduling
Security 802.1X, MAC auth, Web auth, DHCP snooping, DAI, IP lockdown, ACLs
Management Web GUI, CLI (console/USB), SNMP v1/v2c/v3, HP IMC
Monitoring sFlow, RMON, port mirroring
Form Factor 1U rack-mountable
IPv6 Support IPv6 host support
Warranty 12 months (Reboot IT)

Is It Right for You?

✓ Best For ✗ Not For
High-density Gigabit access at the network edge Powering PoE devices (this is a non-PoE model)
Branch offices needing secure, managed access Networks requiring Layer 3 routing
Sites wanting VLANs, QoS, and fibre uplinks High-density 10GbE access requirements
SMB and enterprise edge deployments Buyers needing an active HP support contract

Condition Grades

Grade Cosmetic Condition Functionality
A — Excellent Minimal marks, clean ports and chassis Fully tested, all ports operational
B — Good Light wear, minor scratches Fully tested, all ports operational

Frequently Asked Questions

Does this switch provide PoE?

No — the J9775A is the non-PoE model. If you need to power VoIP phones, cameras, or access points over the network cable, choose a 2530 PoE+ model (e.g. J9772A) instead.

What SFP modules are compatible with the uplinks?

The four SFP uplink ports accept standard Gigabit SFP modules (mini-GBIC), including HP-branded and many third-party 1000BASE-SX, 1000BASE-LX, and 1000BASE-T transceivers. HP-compatible modules are recommended for guaranteed compatibility.

Is this a managed switch?

Yes. The 2530-48G is a fully managed Layer 2 switch supporting VLANs, QoS, ACLs, and 802.1X, configurable via Web GUI, CLI, or SNMP.

Can I manage the switch remotely?

Yes. It supports Web GUI, CLI (console port or micro-USB), and SNMP v1/v2c/v3, and integrates with HP Intelligent Management Center (IMC) for centralised multi-switch management.

What condition will I receive the switch in?

The switch has been professionally cleaned, tested, and graded by Reboot IT technicians in Melbourne. Grade A (Excellent) shows minimal marks; Grade B (Good) shows light wear. All ports are verified operational before dispatch.

What are the shipping options?

Shipping costs apply based on size and destination — rates are calculated at checkout. This switch is a bulky item, so freight rates apply.

12-Month Warranty & Reboot IT Trust

Every HP Aruba 2530-48G (J9775A) switch sold by Reboot IT includes a 12-month warranty covering hardware defects and port failures. If anything goes wrong, our Melbourne-based team handles repairs or replacements quickly — no runaround. We've been refurbishing IT equipment since 2001 and stand behind every unit we sell at reboot-it.com.au.

Product Information

Shipping & Returns

Description

HP Aruba 2530-48G (J9775A) 48-Port Gigabit Managed Switch — Layer 2 Access with SFP Uplinks

The HP Aruba 2530-48G (J9775A) delivers 48 Gigabit ports plus four SFP uplinks in a compact 1U chassis, with full Layer 2 management. Backed by a 12-month Reboot IT warranty, it's a dependable, energy-efficient access switch for enterprise edge and branch-office networks. This is the non-PoE model.

  • 48 × Gigabit Ports: Full 10/100/1000BASE-T on every port for fast wired connectivity to PCs, servers, printers, and access points.
  • 4 × SFP Gigabit Uplinks: Fibre or copper uplinks to core switches and routers for flexible, high-speed backbone connections.
  • Full Layer 2 Management: 802.1Q VLANs, 802.1X / MAC / Web authentication, ACLs, and QoS with priority queues for granular traffic control.
  • Advanced Security: DHCP snooping, Dynamic ARP Protection, and Dynamic IP Lockdown defend against common Layer 2 attacks.
  • Flexible Management: Web GUI, CLI (console or micro-USB), and SNMP v1/v2c/v3, plus HP IMC integration for enterprise-wide visibility.
  • Energy-Efficient Design: IEEE 802.3az EEE, port scheduling, and LED disable reduce power draw without sacrificing performance.

Performance in Use

In a busy office or campus, the 2530-48G excels as an access-layer switch. All 48 Gigabit ports run at full speed, so file transfers, backups, and everyday traffic move quickly across the LAN, while the four SFP uplinks provide clean aggregation paths back to the core — keeping the access layer from becoming a bottleneck. As a non-PoE model, it's an economical choice where powered devices aren't required or where PoE is supplied separately.

The Layer 2 feature set covers the essentials for mid-size deployments: segment traffic with 802.1Q VLANs, enforce per-port security with 802.1X authentication, and prioritise real-time traffic such as VoIP using IEEE 802.1p QoS. DHCP snooping and Dynamic ARP Protection keep the network resilient against common Layer 2 threats, while built-in sFlow and RMON deliver the visibility teams need without extra licensing.

Management flexibility is a standout. Whether your team prefers a Web GUI for day-to-day moves and adds, a CLI for scripted configuration, or SNMP for integration with a network management system, the 2530-48G covers all three. HP Intelligent Management Center (IMC) extends this further with end-to-end topology views, compliance reporting, and policy management across the whole stack.

Technical Specifications

Specification Detail
Model HP Aruba 2530-48G (J9775A)
Ports 48 × 10/100/1000BASE-T RJ-45
Uplink Ports 4 × SFP Gigabit (mini-GBIC)
PoE Non-PoE model
Switching Capacity 104 Gbps
Layer Layer 2 managed
VLANs 802.1Q, up to 512 VLANs
QoS IEEE 802.1p, priority queues, WDRR/SP scheduling
Security 802.1X, MAC auth, Web auth, DHCP snooping, DAI, IP lockdown, ACLs
Management Web GUI, CLI (console/USB), SNMP v1/v2c/v3, HP IMC
Monitoring sFlow, RMON, port mirroring
Form Factor 1U rack-mountable
IPv6 Support IPv6 host support
Warranty 12 months (Reboot IT)

Is It Right for You?

✓ Best For ✗ Not For
High-density Gigabit access at the network edge Powering PoE devices (this is a non-PoE model)
Branch offices needing secure, managed access Networks requiring Layer 3 routing
Sites wanting VLANs, QoS, and fibre uplinks High-density 10GbE access requirements
SMB and enterprise edge deployments Buyers needing an active HP support contract

Condition Grades

Grade Cosmetic Condition Functionality
A — Excellent Minimal marks, clean ports and chassis Fully tested, all ports operational
B — Good Light wear, minor scratches Fully tested, all ports operational

Frequently Asked Questions

Does this switch provide PoE?

No — the J9775A is the non-PoE model. If you need to power VoIP phones, cameras, or access points over the network cable, choose a 2530 PoE+ model (e.g. J9772A) instead.

What SFP modules are compatible with the uplinks?

The four SFP uplink ports accept standard Gigabit SFP modules (mini-GBIC), including HP-branded and many third-party 1000BASE-SX, 1000BASE-LX, and 1000BASE-T transceivers. HP-compatible modules are recommended for guaranteed compatibility.

Is this a managed switch?

Yes. The 2530-48G is a fully managed Layer 2 switch supporting VLANs, QoS, ACLs, and 802.1X, configurable via Web GUI, CLI, or SNMP.

Can I manage the switch remotely?

Yes. It supports Web GUI, CLI (console port or micro-USB), and SNMP v1/v2c/v3, and integrates with HP Intelligent Management Center (IMC) for centralised multi-switch management.

What condition will I receive the switch in?

The switch has been professionally cleaned, tested, and graded by Reboot IT technicians in Melbourne. Grade A (Excellent) shows minimal marks; Grade B (Good) shows light wear. All ports are verified operational before dispatch.

What are the shipping options?

Shipping costs apply based on size and destination — rates are calculated at checkout. This switch is a bulky item, so freight rates apply.

12-Month Warranty & Reboot IT Trust

Every HP Aruba 2530-48G (J9775A) switch sold by Reboot IT includes a 12-month warranty covering hardware defects and port failures. If anything goes wrong, our Melbourne-based team handles repairs or replacements quickly — no runaround. We've been refurbishing IT equipment since 2001 and stand behind every unit we sell at reboot-it.com.au.