Cisco Aironet 1602I AIR-CAP1602I-Z-K9 Wireless AP 802.11n Dual Band PoE Wty
Cisco Aironet 1602I — 802.11n Dual-Band Controller-Based Wireless Access Point
The Cisco Aironet 1602I (AIR-CAP1602I-Z-K9) is a controller-based 802.11n enterprise wireless access point designed for indoor environments. With dual-band 2x2 MIMO and internal antennas, it delivers reliable coverage on both 2.4GHz and 5GHz bands. Powered via PoE+ and managed through a Cisco Wireless LAN Controller, it provides centralised security, RF management, and policy enforcement across the wireless network. Backed by a 12-month Reboot IT warranty.
Key Benefits
- Dual-band 802.11n coverage — Operates on both 2.4GHz and 5GHz simultaneously, allowing legacy devices on 2.4GHz while modern clients enjoy the cleaner 5GHz band
- 2x2 MIMO internal antennas — Built-in antennas provide clean indoor coverage without exposed external aerials, ideal for office and commercial deployments
- Controller-based management — Integrates with Cisco Wireless LAN Controller for centralised configuration, firmware, RF planning, and security policy across the entire AP fleet
- Enterprise-grade security — WPA2, 802.1X/EAP, AES encryption, and TKIP support for secure wireless across corporate and education environments
- PoE+ powered — 802.3at PoE+ eliminates the need for separate power runs, simplifying cabling in new and retrofit installs
- Proven enterprise platform — Cisco Aironet 1600 series widely deployed in education, retail, and commercial offices for consistent, manageable wireless coverage
Performance in Office and Commercial Environments
The 1602I suits indoor enterprise deployments where centralised management and reliable 802.11n coverage are the key requirements. With 2x2 MIMO and up to 300 Mbps per band, it handles typical office workloads — email, file access, web browsing, and VoIP — comfortably across a standard indoor cell. Internal antennas produce a broad, consistent coverage pattern suited to open-plan offices, meeting rooms, and corridors.
Being controller-based, the 1602I requires a Cisco Wireless LAN Controller (WLC) or Cisco Mobility Express to operate. In controller-managed environments, this enables centralised SSID management, band steering, client load balancing, and rogue detection across all APs from a single interface, reducing day-to-day management overhead significantly.
For organisations still running 802.11n infrastructure or expanding an existing Cisco wireless deployment, the 1602I delivers dependable coverage at a significantly lower cost than new 802.11ac equivalents where the workload does not require AC-tier speeds.
Technical Specifications
| Specification | Details |
|---|---|
| Model | Cisco Aironet 1602I — AIR-CAP1602I-Z-K9 |
| Wireless Standard | 802.11a/b/g/n dual-band (2.4GHz and 5GHz) |
| MIMO | 2x2:2 (two spatial streams per band) |
| Max Data Rate | Up to 300 Mbps per band |
| Antennas | Internal (I suffix) |
| Management | Controller-based — requires Cisco WLC |
| Power | 802.3at PoE+ (or 802.3af with reduced power) |
| Security | WPA2, 802.1X/EAP, AES, TKIP |
| Mounting | Ceiling or wall mount |
| Warranty | 12-month Reboot IT warranty |
Is the Cisco Aironet 1602I Right for You?
|
✓ Best For: • Existing Cisco WLC-managed environments • Indoor office, retail, and education deployments • Expanding 802.11n wireless infrastructure • PoE+-capable switching infrastructure • Budget-conscious enterprise wireless upgrades |
✗ Not Recommended For: • Standalone use (controller required) • Sites needing 802.11ac/Wi-Fi 5 speeds • High-density environments with 50+ clients per AP • Outdoor or high-moisture locations |
Condition Grades
| Grade | Cosmetic Condition | Functional Testing |
|---|---|---|
| A — Excellent | Minimal signs of use, near-new appearance | Dual-band radio, PoE, Ethernet port, and status indicators verified |
| B — Good | Light surface or mounting marks, fully functional | Dual-band radio, PoE, Ethernet port, and status indicators verified |
Frequently Asked Questions
Does the 1602I work as a standalone access point?
No — the 1602I is a controller-based AP and requires a Cisco Wireless LAN Controller (WLC) to operate. It cannot function as a standalone or home access point.
What Cisco WLC versions are compatible?
The 1602I is compatible with Cisco WLC software from version 7.3 onwards. Check Cisco's compatibility matrix for your specific WLC model and software version.
Does this AP support 802.11ac?
No — the 1602I is an 802.11n device. If you need 802.11ac (Wi-Fi 5) performance, consider the Cisco Aironet 2702I or 3702I series.
Is a mounting bracket included?
A ceiling mounting bracket is typically included. Check the listing images or contact us to confirm accessories with this unit.
Does free shipping apply?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Warranty & After-Sales Support
This Cisco Aironet 1602I wireless access point includes a 12-month warranty from Reboot IT, covering all hardware defects and functional failures from the date of purchase.
Reboot IT has been Australia's trusted refurbished IT specialist since 2001. Every access point is professionally tested — dual-band radio, PoE, Ethernet, and status indicators verified before dispatch. Shop at reboot-it.com.au.
Original: $13.30
-65%$13.30
$4.66Cisco Aironet 1602I AIR-CAP1602I-Z-K9 Wireless AP 802.11n Dual Band PoE Wty
Cisco Aironet 1602I — 802.11n Dual-Band Controller-Based Wireless Access Point
The Cisco Aironet 1602I (AIR-CAP1602I-Z-K9) is a controller-based 802.11n enterprise wireless access point designed for indoor environments. With dual-band 2x2 MIMO and internal antennas, it delivers reliable coverage on both 2.4GHz and 5GHz bands. Powered via PoE+ and managed through a Cisco Wireless LAN Controller, it provides centralised security, RF management, and policy enforcement across the wireless network. Backed by a 12-month Reboot IT warranty.
Key Benefits
- Dual-band 802.11n coverage — Operates on both 2.4GHz and 5GHz simultaneously, allowing legacy devices on 2.4GHz while modern clients enjoy the cleaner 5GHz band
- 2x2 MIMO internal antennas — Built-in antennas provide clean indoor coverage without exposed external aerials, ideal for office and commercial deployments
- Controller-based management — Integrates with Cisco Wireless LAN Controller for centralised configuration, firmware, RF planning, and security policy across the entire AP fleet
- Enterprise-grade security — WPA2, 802.1X/EAP, AES encryption, and TKIP support for secure wireless across corporate and education environments
- PoE+ powered — 802.3at PoE+ eliminates the need for separate power runs, simplifying cabling in new and retrofit installs
- Proven enterprise platform — Cisco Aironet 1600 series widely deployed in education, retail, and commercial offices for consistent, manageable wireless coverage
Performance in Office and Commercial Environments
The 1602I suits indoor enterprise deployments where centralised management and reliable 802.11n coverage are the key requirements. With 2x2 MIMO and up to 300 Mbps per band, it handles typical office workloads — email, file access, web browsing, and VoIP — comfortably across a standard indoor cell. Internal antennas produce a broad, consistent coverage pattern suited to open-plan offices, meeting rooms, and corridors.
Being controller-based, the 1602I requires a Cisco Wireless LAN Controller (WLC) or Cisco Mobility Express to operate. In controller-managed environments, this enables centralised SSID management, band steering, client load balancing, and rogue detection across all APs from a single interface, reducing day-to-day management overhead significantly.
For organisations still running 802.11n infrastructure or expanding an existing Cisco wireless deployment, the 1602I delivers dependable coverage at a significantly lower cost than new 802.11ac equivalents where the workload does not require AC-tier speeds.
Technical Specifications
| Specification | Details |
|---|---|
| Model | Cisco Aironet 1602I — AIR-CAP1602I-Z-K9 |
| Wireless Standard | 802.11a/b/g/n dual-band (2.4GHz and 5GHz) |
| MIMO | 2x2:2 (two spatial streams per band) |
| Max Data Rate | Up to 300 Mbps per band |
| Antennas | Internal (I suffix) |
| Management | Controller-based — requires Cisco WLC |
| Power | 802.3at PoE+ (or 802.3af with reduced power) |
| Security | WPA2, 802.1X/EAP, AES, TKIP |
| Mounting | Ceiling or wall mount |
| Warranty | 12-month Reboot IT warranty |
Is the Cisco Aironet 1602I Right for You?
|
✓ Best For: • Existing Cisco WLC-managed environments • Indoor office, retail, and education deployments • Expanding 802.11n wireless infrastructure • PoE+-capable switching infrastructure • Budget-conscious enterprise wireless upgrades |
✗ Not Recommended For: • Standalone use (controller required) • Sites needing 802.11ac/Wi-Fi 5 speeds • High-density environments with 50+ clients per AP • Outdoor or high-moisture locations |
Condition Grades
| Grade | Cosmetic Condition | Functional Testing |
|---|---|---|
| A — Excellent | Minimal signs of use, near-new appearance | Dual-band radio, PoE, Ethernet port, and status indicators verified |
| B — Good | Light surface or mounting marks, fully functional | Dual-band radio, PoE, Ethernet port, and status indicators verified |
Frequently Asked Questions
Does the 1602I work as a standalone access point?
No — the 1602I is a controller-based AP and requires a Cisco Wireless LAN Controller (WLC) to operate. It cannot function as a standalone or home access point.
What Cisco WLC versions are compatible?
The 1602I is compatible with Cisco WLC software from version 7.3 onwards. Check Cisco's compatibility matrix for your specific WLC model and software version.
Does this AP support 802.11ac?
No — the 1602I is an 802.11n device. If you need 802.11ac (Wi-Fi 5) performance, consider the Cisco Aironet 2702I or 3702I series.
Is a mounting bracket included?
A ceiling mounting bracket is typically included. Check the listing images or contact us to confirm accessories with this unit.
Does free shipping apply?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Warranty & After-Sales Support
This Cisco Aironet 1602I wireless access point includes a 12-month warranty from Reboot IT, covering all hardware defects and functional failures from the date of purchase.
Reboot IT has been Australia's trusted refurbished IT specialist since 2001. Every access point is professionally tested — dual-band radio, PoE, Ethernet, and status indicators verified before dispatch. Shop at reboot-it.com.au.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cisco Aironet 1602I — 802.11n Dual-Band Controller-Based Wireless Access Point
The Cisco Aironet 1602I (AIR-CAP1602I-Z-K9) is a controller-based 802.11n enterprise wireless access point designed for indoor environments. With dual-band 2x2 MIMO and internal antennas, it delivers reliable coverage on both 2.4GHz and 5GHz bands. Powered via PoE+ and managed through a Cisco Wireless LAN Controller, it provides centralised security, RF management, and policy enforcement across the wireless network. Backed by a 12-month Reboot IT warranty.
Key Benefits
- Dual-band 802.11n coverage — Operates on both 2.4GHz and 5GHz simultaneously, allowing legacy devices on 2.4GHz while modern clients enjoy the cleaner 5GHz band
- 2x2 MIMO internal antennas — Built-in antennas provide clean indoor coverage without exposed external aerials, ideal for office and commercial deployments
- Controller-based management — Integrates with Cisco Wireless LAN Controller for centralised configuration, firmware, RF planning, and security policy across the entire AP fleet
- Enterprise-grade security — WPA2, 802.1X/EAP, AES encryption, and TKIP support for secure wireless across corporate and education environments
- PoE+ powered — 802.3at PoE+ eliminates the need for separate power runs, simplifying cabling in new and retrofit installs
- Proven enterprise platform — Cisco Aironet 1600 series widely deployed in education, retail, and commercial offices for consistent, manageable wireless coverage
Performance in Office and Commercial Environments
The 1602I suits indoor enterprise deployments where centralised management and reliable 802.11n coverage are the key requirements. With 2x2 MIMO and up to 300 Mbps per band, it handles typical office workloads — email, file access, web browsing, and VoIP — comfortably across a standard indoor cell. Internal antennas produce a broad, consistent coverage pattern suited to open-plan offices, meeting rooms, and corridors.
Being controller-based, the 1602I requires a Cisco Wireless LAN Controller (WLC) or Cisco Mobility Express to operate. In controller-managed environments, this enables centralised SSID management, band steering, client load balancing, and rogue detection across all APs from a single interface, reducing day-to-day management overhead significantly.
For organisations still running 802.11n infrastructure or expanding an existing Cisco wireless deployment, the 1602I delivers dependable coverage at a significantly lower cost than new 802.11ac equivalents where the workload does not require AC-tier speeds.
Technical Specifications
| Specification | Details |
|---|---|
| Model | Cisco Aironet 1602I — AIR-CAP1602I-Z-K9 |
| Wireless Standard | 802.11a/b/g/n dual-band (2.4GHz and 5GHz) |
| MIMO | 2x2:2 (two spatial streams per band) |
| Max Data Rate | Up to 300 Mbps per band |
| Antennas | Internal (I suffix) |
| Management | Controller-based — requires Cisco WLC |
| Power | 802.3at PoE+ (or 802.3af with reduced power) |
| Security | WPA2, 802.1X/EAP, AES, TKIP |
| Mounting | Ceiling or wall mount |
| Warranty | 12-month Reboot IT warranty |
Is the Cisco Aironet 1602I Right for You?
|
✓ Best For: • Existing Cisco WLC-managed environments • Indoor office, retail, and education deployments • Expanding 802.11n wireless infrastructure • PoE+-capable switching infrastructure • Budget-conscious enterprise wireless upgrades |
✗ Not Recommended For: • Standalone use (controller required) • Sites needing 802.11ac/Wi-Fi 5 speeds • High-density environments with 50+ clients per AP • Outdoor or high-moisture locations |
Condition Grades
| Grade | Cosmetic Condition | Functional Testing |
|---|---|---|
| A — Excellent | Minimal signs of use, near-new appearance | Dual-band radio, PoE, Ethernet port, and status indicators verified |
| B — Good | Light surface or mounting marks, fully functional | Dual-band radio, PoE, Ethernet port, and status indicators verified |
Frequently Asked Questions
Does the 1602I work as a standalone access point?
No — the 1602I is a controller-based AP and requires a Cisco Wireless LAN Controller (WLC) to operate. It cannot function as a standalone or home access point.
What Cisco WLC versions are compatible?
The 1602I is compatible with Cisco WLC software from version 7.3 onwards. Check Cisco's compatibility matrix for your specific WLC model and software version.
Does this AP support 802.11ac?
No — the 1602I is an 802.11n device. If you need 802.11ac (Wi-Fi 5) performance, consider the Cisco Aironet 2702I or 3702I series.
Is a mounting bracket included?
A ceiling mounting bracket is typically included. Check the listing images or contact us to confirm accessories with this unit.
Does free shipping apply?
Shipping costs apply based on size and destination — rates are calculated at checkout.
Warranty & After-Sales Support
This Cisco Aironet 1602I wireless access point includes a 12-month warranty from Reboot IT, covering all hardware defects and functional failures from the date of purchase.
Reboot IT has been Australia's trusted refurbished IT specialist since 2001. Every access point is professionally tested — dual-band radio, PoE, Ethernet, and status indicators verified before dispatch. Shop at reboot-it.com.au.
