APC Smart-UPS 1000 SMT1000RMI2U 1000VA 700W Rack 2U LCD 230V UPS No Battery
HomeStore

APC Smart-UPS 1000 SMT1000RMI2U 1000VA 700W Rack 2U LCD 230V UPS No Battery

APC Smart-UPS 1000 SMT1000RMI2U 1000VA 700W Rack 2U LCD 230V UPS No Battery

APC Smart-UPS 1000 SMT1000RMI2U — 1000VA / 700W 2U Rackmount UPS

The APC Smart-UPS SMT1000RMI2U is a 1000VA / 700W line-interactive 2U rackmount UPS with pure sine wave output, automatic voltage regulation (AVR), and an LCD status display in a 230V chassis. Supplied without a battery. Professionally graded by Reboot IT.

Battery not included — all grades. This UPS ships without a battery. The unit is tested to power on and run from mains (electronics and AVR functional), but a compatible replacement battery must be fitted to provide backup runtime. Output outlets are untested. Good-grade units also ship without the front faceplate/bezel.

Key Benefits

  • 1000VA / 700W capacity: Line-interactive design sized for a rack of network gear or a small server once a compatible battery is fitted.
  • Pure sine wave output: Clean power, safe for servers and equipment with active-PFC power supplies.
  • Automatic Voltage Regulation: Corrects high and low mains voltage without drawing on the battery.
  • 2U rackmount, 230V: IEC C14 input with four IEC C13 outlets for tidy rack cabling.
  • LCD status display: On-unit LCD reports load, voltage, and status at a glance.
  • SmartSlot management: Accepts an optional APC Network Management Card for remote monitoring and graceful shutdown.

Performance in Use

The Smart-UPS platform is a workhorse for comms rooms and server racks: line-interactive topology with automatic voltage regulation rides out sags, surges, and brownouts, while pure sine wave output keeps sensitive active-PFC power supplies stable. The LCD and optional SmartSlot network management card make the unit easy to monitor and manage.

Battery and outlets: this unit is supplied with no battery, for every grade. It powers on and runs from mains, but will not provide backup runtime until a compatible replacement battery is fitted. The output outlets have not been tested. Good-grade units also ship without the front faceplate.

For a buyer who will fit a battery, this is a cost-effective route into a capable rack UPS chassis with AVR, LCD, and network management.

Technical Specifications

Model APC Smart-UPS SMT1000RMI2U
Capacity 1000VA / 700W
Topology Line-interactive, pure sine wave, AVR
Form Factor 2U rackmount
Input 230V, IEC 320 C14
Outlets 4 × IEC 320 C13 (untested)
Display / Management LCD, SmartSlot (optional NMC), USB / serial
Battery Not included (all grades) — fit a compatible replacement for runtime
Warranty 12 months (unit powering on) — battery not included; outlets excluded

Is It Right for You?

✓ Best For:
• Buyers who will fit a compatible battery
• Comms rooms / server racks needing a 2U 230V UPS
• Network-managed power via SmartSlot
• Pure sine wave for active-PFC PSUs
✗ Not For:
• Anyone needing working runtime or tested outlets out of the box
• 120V regions (this is a 230V unit)
• Buyers wanting a battery included or battery cover
• Tower / desktop placement (this is 2U rack)

Condition Grades

Grade Cosmetic Condition Functional
A — Excellent Minimal cosmetic wear; front faceplate present. No battery included. Powers on from mains; AVR/LCD verified. Outlets untested; no battery supplied.
B — Good Light to moderate wear; front faceplate/bezel NOT included on Good grade. No battery included. Powers on from mains; AVR/LCD verified. Outlets untested; no battery supplied.

Frequently Asked Questions

Is a battery included?

No — this UPS ships without a battery for all grades. Fit a compatible APC replacement cartridge to restore runtime.

What is different about Good grade?

Good-grade units ship without the front faceplate/bezel and may show light to moderate cosmetic wear. They remain fully functional.

Does it output pure sine wave?

Yes — the Smart-UPS SMT series outputs pure sine wave, safe for active-PFC power supplies.

Can I manage it over the network?

Yes — the SmartSlot accepts an optional APC Network Management Card; USB / serial management is also supported.

How does shipping work?

Shipping costs apply based on size and destination — rates are calculated at checkout.

Warranty & After-Sales Support

This APC Smart-UPS SMT1000RMI2U is backed by a 12-month Reboot IT warranty covering the unit powering on; the battery is not included (all grades) and the untested outlets are excluded.

Reboot IT has been Australia's trusted refurbished IT specialist since 2001. Every unit is professionally tested before dispatch. Shop at reboot-it.com.au.

Select Select Option
From $48.74

Original: $139.27

-65%
APC Smart-UPS 1000 SMT1000RMI2U 1000VA 700W Rack 2U LCD 230V UPS No Battery

$139.27

$48.74

More Images

APC Smart-UPS 1000 SMT1000RMI2U 1000VA 700W Rack 2U LCD 230V UPS No Battery - Image 2

APC Smart-UPS 1000 SMT1000RMI2U 1000VA 700W Rack 2U LCD 230V UPS No Battery

APC Smart-UPS 1000 SMT1000RMI2U — 1000VA / 700W 2U Rackmount UPS

The APC Smart-UPS SMT1000RMI2U is a 1000VA / 700W line-interactive 2U rackmount UPS with pure sine wave output, automatic voltage regulation (AVR), and an LCD status display in a 230V chassis. Supplied without a battery. Professionally graded by Reboot IT.

Battery not included — all grades. This UPS ships without a battery. The unit is tested to power on and run from mains (electronics and AVR functional), but a compatible replacement battery must be fitted to provide backup runtime. Output outlets are untested. Good-grade units also ship without the front faceplate/bezel.

Key Benefits

  • 1000VA / 700W capacity: Line-interactive design sized for a rack of network gear or a small server once a compatible battery is fitted.
  • Pure sine wave output: Clean power, safe for servers and equipment with active-PFC power supplies.
  • Automatic Voltage Regulation: Corrects high and low mains voltage without drawing on the battery.
  • 2U rackmount, 230V: IEC C14 input with four IEC C13 outlets for tidy rack cabling.
  • LCD status display: On-unit LCD reports load, voltage, and status at a glance.
  • SmartSlot management: Accepts an optional APC Network Management Card for remote monitoring and graceful shutdown.

Performance in Use

The Smart-UPS platform is a workhorse for comms rooms and server racks: line-interactive topology with automatic voltage regulation rides out sags, surges, and brownouts, while pure sine wave output keeps sensitive active-PFC power supplies stable. The LCD and optional SmartSlot network management card make the unit easy to monitor and manage.

Battery and outlets: this unit is supplied with no battery, for every grade. It powers on and runs from mains, but will not provide backup runtime until a compatible replacement battery is fitted. The output outlets have not been tested. Good-grade units also ship without the front faceplate.

For a buyer who will fit a battery, this is a cost-effective route into a capable rack UPS chassis with AVR, LCD, and network management.

Technical Specifications

Model APC Smart-UPS SMT1000RMI2U
Capacity 1000VA / 700W
Topology Line-interactive, pure sine wave, AVR
Form Factor 2U rackmount
Input 230V, IEC 320 C14
Outlets 4 × IEC 320 C13 (untested)
Display / Management LCD, SmartSlot (optional NMC), USB / serial
Battery Not included (all grades) — fit a compatible replacement for runtime
Warranty 12 months (unit powering on) — battery not included; outlets excluded

Is It Right for You?

✓ Best For:
• Buyers who will fit a compatible battery
• Comms rooms / server racks needing a 2U 230V UPS
• Network-managed power via SmartSlot
• Pure sine wave for active-PFC PSUs
✗ Not For:
• Anyone needing working runtime or tested outlets out of the box
• 120V regions (this is a 230V unit)
• Buyers wanting a battery included or battery cover
• Tower / desktop placement (this is 2U rack)

Condition Grades

Grade Cosmetic Condition Functional
A — Excellent Minimal cosmetic wear; front faceplate present. No battery included. Powers on from mains; AVR/LCD verified. Outlets untested; no battery supplied.
B — Good Light to moderate wear; front faceplate/bezel NOT included on Good grade. No battery included. Powers on from mains; AVR/LCD verified. Outlets untested; no battery supplied.

Frequently Asked Questions

Is a battery included?

No — this UPS ships without a battery for all grades. Fit a compatible APC replacement cartridge to restore runtime.

What is different about Good grade?

Good-grade units ship without the front faceplate/bezel and may show light to moderate cosmetic wear. They remain fully functional.

Does it output pure sine wave?

Yes — the Smart-UPS SMT series outputs pure sine wave, safe for active-PFC power supplies.

Can I manage it over the network?

Yes — the SmartSlot accepts an optional APC Network Management Card; USB / serial management is also supported.

How does shipping work?

Shipping costs apply based on size and destination — rates are calculated at checkout.

Warranty & After-Sales Support

This APC Smart-UPS SMT1000RMI2U is backed by a 12-month Reboot IT warranty covering the unit powering on; the battery is not included (all grades) and the untested outlets are excluded.

Reboot IT has been Australia's trusted refurbished IT specialist since 2001. Every unit is professionally tested before dispatch. Shop at reboot-it.com.au.

Product Information

Shipping & Returns

Description

APC Smart-UPS 1000 SMT1000RMI2U — 1000VA / 700W 2U Rackmount UPS

The APC Smart-UPS SMT1000RMI2U is a 1000VA / 700W line-interactive 2U rackmount UPS with pure sine wave output, automatic voltage regulation (AVR), and an LCD status display in a 230V chassis. Supplied without a battery. Professionally graded by Reboot IT.

Battery not included — all grades. This UPS ships without a battery. The unit is tested to power on and run from mains (electronics and AVR functional), but a compatible replacement battery must be fitted to provide backup runtime. Output outlets are untested. Good-grade units also ship without the front faceplate/bezel.

Key Benefits

  • 1000VA / 700W capacity: Line-interactive design sized for a rack of network gear or a small server once a compatible battery is fitted.
  • Pure sine wave output: Clean power, safe for servers and equipment with active-PFC power supplies.
  • Automatic Voltage Regulation: Corrects high and low mains voltage without drawing on the battery.
  • 2U rackmount, 230V: IEC C14 input with four IEC C13 outlets for tidy rack cabling.
  • LCD status display: On-unit LCD reports load, voltage, and status at a glance.
  • SmartSlot management: Accepts an optional APC Network Management Card for remote monitoring and graceful shutdown.

Performance in Use

The Smart-UPS platform is a workhorse for comms rooms and server racks: line-interactive topology with automatic voltage regulation rides out sags, surges, and brownouts, while pure sine wave output keeps sensitive active-PFC power supplies stable. The LCD and optional SmartSlot network management card make the unit easy to monitor and manage.

Battery and outlets: this unit is supplied with no battery, for every grade. It powers on and runs from mains, but will not provide backup runtime until a compatible replacement battery is fitted. The output outlets have not been tested. Good-grade units also ship without the front faceplate.

For a buyer who will fit a battery, this is a cost-effective route into a capable rack UPS chassis with AVR, LCD, and network management.

Technical Specifications

Model APC Smart-UPS SMT1000RMI2U
Capacity 1000VA / 700W
Topology Line-interactive, pure sine wave, AVR
Form Factor 2U rackmount
Input 230V, IEC 320 C14
Outlets 4 × IEC 320 C13 (untested)
Display / Management LCD, SmartSlot (optional NMC), USB / serial
Battery Not included (all grades) — fit a compatible replacement for runtime
Warranty 12 months (unit powering on) — battery not included; outlets excluded

Is It Right for You?

✓ Best For:
• Buyers who will fit a compatible battery
• Comms rooms / server racks needing a 2U 230V UPS
• Network-managed power via SmartSlot
• Pure sine wave for active-PFC PSUs
✗ Not For:
• Anyone needing working runtime or tested outlets out of the box
• 120V regions (this is a 230V unit)
• Buyers wanting a battery included or battery cover
• Tower / desktop placement (this is 2U rack)

Condition Grades

Grade Cosmetic Condition Functional
A — Excellent Minimal cosmetic wear; front faceplate present. No battery included. Powers on from mains; AVR/LCD verified. Outlets untested; no battery supplied.
B — Good Light to moderate wear; front faceplate/bezel NOT included on Good grade. No battery included. Powers on from mains; AVR/LCD verified. Outlets untested; no battery supplied.

Frequently Asked Questions

Is a battery included?

No — this UPS ships without a battery for all grades. Fit a compatible APC replacement cartridge to restore runtime.

What is different about Good grade?

Good-grade units ship without the front faceplate/bezel and may show light to moderate cosmetic wear. They remain fully functional.

Does it output pure sine wave?

Yes — the Smart-UPS SMT series outputs pure sine wave, safe for active-PFC power supplies.

Can I manage it over the network?

Yes — the SmartSlot accepts an optional APC Network Management Card; USB / serial management is also supported.

How does shipping work?

Shipping costs apply based on size and destination — rates are calculated at checkout.

Warranty & After-Sales Support

This APC Smart-UPS SMT1000RMI2U is backed by a 12-month Reboot IT warranty covering the unit powering on; the battery is not included (all grades) and the untested outlets are excluded.

Reboot IT has been Australia's trusted refurbished IT specialist since 2001. Every unit is professionally tested before dispatch. Shop at reboot-it.com.au.